tailshaft bushing
06-29-2005, 07:40 PM
#1
Teching In
Thread Starter
Join Date: Jan 2005
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
tailshaft bushing Since I put my full suspension on I keep wearing out tailshaft bushings. My pinion angle is set at -2 degrees. This is get old so any help would be appreciated.
06-29-2005, 10:07 PM
#2
TECH Fanatic
Join Date: Oct 2003
Posts: 1,476
Likes: 0
Received 0 Likes
on
0 Posts
make sure seal is completely flush. Look close and tap lightly w/a small hammer if it is not. A few thousands out on one side will cause the seal to leak slightly. check w/feeler guage. I replaced mine and it dosen't leak. I also have LCA, LCA relo Brkt's
Spohn Spherical adj. torque arm. Pinion set @ 1* neg. 1.65 60ft. no leaks
Spohn Spherical adj. torque arm. Pinion set @ 1* neg. 1.65 60ft. no leaks