12 Bolt Setup. Is this the Cheapest i could do it?
12 Bolt Setup. Is this the Cheapest i could do it? Hey found a possible Deal on a 12 bolt. But I have a couple Questions for ya!
Ok Found a Moser 12 bolt Rear. Includes Housing, Axles& Bearings, Studs, Retainer plates. For $775 From a sponsor.
So that will Leave me needing the fallowing (As Far as i know)
>Carrier/posi (About $350 for Albern Pro from moser, probly get this ALOT cheaper from a hook up!)
>Bearings (Say $75 on the HIGH side)
>Gears (Say $180)
>ABS Parts ($100)
>Shims (?? $20 on the high side)
>Cover (?? $25 el-cheapo Chrome)
>And The Yoke (if it dont come with $50)
Total Extra Parts $800 (On the HIGH side!!!) That's if i get all new parts and Top of the Line..Correct??
So $775+$800=$1570 !!! WAAHOOOOOO!!!! A HELL Of alot cheaper than Moser ask for all that @#%$!! $2100 from them.
What am i Missing? Besides Labor (which i have FREEEEE!!!) And I know Ill need Drive Shaft/U-Joints to deal with But Heck I'm Already Saving $5-600+!!
Just going for the cheapest simce im a poor *****. Help me out if you can... <img src="graemlins/gr_cheers.gif" border="0" alt="[cheers]" /> <img src="graemlins/camaro.gif" border="0" alt="[Chevrolet]" />
[ February 13, 2002: Message edited by: Tim 98z ]</p>
Ok Found a Moser 12 bolt Rear. Includes Housing, Axles& Bearings, Studs, Retainer plates. For $775 From a sponsor.
So that will Leave me needing the fallowing (As Far as i know)
>Carrier/posi (About $350 for Albern Pro from moser, probly get this ALOT cheaper from a hook up!)
>Bearings (Say $75 on the HIGH side)
>Gears (Say $180)
>ABS Parts ($100)
>Shims (?? $20 on the high side)
>Cover (?? $25 el-cheapo Chrome)
>And The Yoke (if it dont come with $50)
Total Extra Parts $800 (On the HIGH side!!!) That's if i get all new parts and Top of the Line..Correct??
So $775+$800=$1570 !!! WAAHOOOOOO!!!! A HELL Of alot cheaper than Moser ask for all that @#%$!! $2100 from them.
What am i Missing? Besides Labor (which i have FREEEEE!!!) And I know Ill need Drive Shaft/U-Joints to deal with But Heck I'm Already Saving $5-600+!!
Just going for the cheapest simce im a poor *****. Help me out if you can... <img src="graemlins/gr_cheers.gif" border="0" alt="[cheers]" /> <img src="graemlins/camaro.gif" border="0" alt="[Chevrolet]" />
[ February 13, 2002: Message edited by: Tim 98z ]</p>
TECH Senior Member
Joined: Nov 2001
Posts: 11,603
Likes: 0
From: Chi-Town, IL
Re: 12 Bolt Setup. Is this the Cheapest i could do it? That sounds about right....figure another 100 or so towards the end if you forget all the little things...still is cheaper... <img src="gr_stretch.gif" border="0">
