4.30 vs 4.56 gears?
03-08-2002, 03:27 PM
#1
Launching!
Thread Starter
Join Date: Nov 2001
Location: Westminster, CO
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
4.30 vs 4.56 gears? I'm having trouble deciding on what gears to get when I order my 12 bolt next week. I'm debating between 4.30's and 4.56's. One thing that could decide is tires. Is there any DOT tire that could give me traction at a well prepped track launching above 5,000 rpms with my M6? I was planning on ordering some Hoosier QTP's since they are DOT listed <img src="gr_grin.gif" border="0"> I need DOT for the club clash series I'm running in this year, otherwise the 4.56's would be a no brainer!
Anyone pro's or con's? I'll have a MMS Stage 2X h/c going in at the same time so rev limiter of at least 6600 maybe higher is going to be set so I'm not worried about running out of room with either gear.
Anyone pro's or con's? I'll have a MMS Stage 2X h/c going in at the same time so rev limiter of at least 6600 maybe higher is going to be set so I'm not worried about running out of room with either gear.
03-08-2002, 09:26 PM
#6
Launching!
Thread Starter
Join Date: Nov 2001
Location: Westminster, CO
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4.30 vs 4.56 gears? Those are the exact tires I was thinking of <img src="gr_stretch.gif" border="0"> Any ideas if making low 400's for hp and tq do you think it is still a good idea to go 4.56's? I'm really leaning towards them!
