9" >>>which one???
Thread Starter
TECH Resident
iTrader: (2)
Joined: Mar 2005
Posts: 750
Likes: 0
From: strong island, NY
9" >>>which one??? well, im debating whether i should use the strange 9" for my 99 ta/... since it bolts up as a direct replacement/near stock install..but i dont mind custom fab or anything... i want to use themoser... since i heard about it from great resources when i originally decided to trah my 10 bolt... i dont want to use a 12 bolt, so tell me what you all think. I am streetin it, no drag.. I know it is a full out indestructible rear, i just want it cuz its a great unit. I am runnin eventually a 418 w/ f.i. and a beefy m6. My other question, for that unit,among the many gears, it says available gearing is 3.90/3.70...and i think there was also a 3.50... i want to know if the rear i am gonna bolt in can use 3.70, and is that too high in the ev ent i will boost the car soon enough into the future>..
The Moser 9 inch bolts right in, and is a direct replacement. No fabbing is required for it to fit. A 3.70 gear is a good choice when the horsepower at the rear tires gets past 500 rwhp, unless you rev it pretty high through the traps. Bob
TECH Fanatic
Joined: Mar 2002
Posts: 1,169
Likes: 0
Originally Posted by Exotic Performance Plus
The Moser 9 inch bolts right in, and is a direct replacement. No fabbing is required for it to fit. A 3.70 gear is a good choice when the horsepower at the rear tires gets past 500 rwhp, unless you rev it pretty high through the traps. Bob
What do you sell the bare Moser 9" housing with T/A mount for?
thanks
