9in guys please help .
9in guys please help . On the 10 bolt there is a bracket that bots to rearend that holds both of the brake fluid lines to the rear. What do i do with it now is there a place to bolt it to the 9in 
Do i just need to find a place to strap it to or what would be the best thing to do ? Any info would be greatly appreciated .
Do i just need to find a place to strap it to or what would be the best thing to do ? Any info would be greatly appreciated . 
Originally Posted by 2000slpss
if i remember right all i did was trim them so they bolted onto the 9" just liek they did on the 10 bolt
it is just sitting up ther e loose right this min.Here is some pics for some help.
Last edited by 2001z; Aug 28, 2006 at 04:02 PM.
yeah i just drilled a small hole through a part of the center section (not actually through it, but where there was the "webbed" part that goes from the center out) and stuck a long bolt through it and bent myself up all new brake lines and it's been working good since.
I just took the bracket off completely. Your Brake lines are just snapped into it, and it really doesn't help anything. It gets in the way more than anything. Just disconnect your brake lines from the bracket, and throw it away.
