question about the 10 bolt
Thread Starter
TECH Apprentice
Joined: Oct 2006
Posts: 365
Likes: 0
From: Ft. Carson, Colorado Springs
question about the 10 bolt you think the 10 bolt will hold with 3.73's close to 500rwhp on street tires? i dont on ever putting slicks on i want to see how quick i can get it on street tires.
Keliente's favorite : https://ls1tech.com/forums/showthrea...=510589&page=1
It's in the Bible. Shame on you.
It's in the Bible. Shame on you.
I run 500+rwhp (on nitrous) with 3.90's in the 10bolt with a TA cover on Nitto DR's with no breakage. It all depends on how you drive it......if you don't want to be in the "is it gonna break?" frame of mind then get a 9" or S60.....The frequency of 12bolt's being broken with M6's has increased a good bit.
If you are running a A4 then the 10bolt should take a good amount of abuse then the 12bolt would be all you need.
If you are running a A4 then the 10bolt should take a good amount of abuse then the 12bolt would be all you need.
430 Rwhp On Motor With A Built 10bolt ... Just Tore It Down After 2 Yrs Because The Spider Gears Cracked ..but Id Be Willing To Bet If I Hadent Power Slid The Car Thru Turns For All Those 10k Miles It Would Still Be Working Fine.... Also I Run 17x11 Nitto 555r's And Only Use The Car For Recreational Driving (ie: All 10k Miles Were Raceing And Hard Driving)
