SOLID PINION SPACER need response asap!
SOLID PINION SPACER need response asap! unfortunately i can not afford a 12 bolt yet, so i had to rebuild my shitty 10 bolt to get it up and rolling. but i used a solid pinion spacer from raetech last time, i need to know if that is reusable again since it is much stronger than a crush sleeve or do i have to get a new one?
TECH Enthusiast
Joined: Sep 2003
Posts: 501
Likes: 0
From: bethel PA
they are reusable thats the hole idea behind them if you have the same gears/spacers but if you put diffrent gears in there its going to be diffrent, you grind down the solid spacer to give you your bearing torque.
Originally Posted by lethal93ta
they are reusable thats the hole idea behind them if you have the same gears/spacers but if you put diffrent gears in there its going to be diffrent, you grind down the solid spacer to give you your bearing torque.
I'm going to install a solid spacer in my 12 bolt and hope i dont have to grind on it.Theres not much info around on how to install a solid spacer.
Originally Posted by ssmoov1
I installed solid spacer in my 10 bolt it came with some shims but i didn't know you were supposed to grind on them.I geuss i was just lucky and came out with the correct preload with adding 1 shim with the spacer.
I'm going to install a solid spacer in my 12 bolt and hope i dont have to grind on it.Theres not much info around on how to install a solid spacer.
I'm going to install a solid spacer in my 12 bolt and hope i dont have to grind on it.Theres not much info around on how to install a solid spacer.
