Carbon Fiber Drive Shaft
#1
Restricted User
Thread Starter
iTrader: (10)
Join Date: Feb 2007
Location: Jersey
Posts: 1,455
Likes: 0
Received 0 Likes
on
0 Posts
Carbon Fiber Drive Shaft
I've been shopping around for a CF drive shaft and I'm ready to make a purcahse....my only question is that I found one 3 1/4" and 3 3/4" of course the 3 1/4" is cheaper....could I use that? What would be the major difference between the two with only being 1/2" bigger? I'm really not drive shaft savy so any help would be great....thanks...
-Dave
-Dave
#4
Kleeborp the Moderator™
iTrader: (11)
I went with a 3.75" CF shaft from PST, although I never asked what the power ratings were between the two. I think JR HAWK 9 (or something like that) on here went with the 3.25"...the 3.25" shaft would probably hold plenty of power, and give you a bit more clearance with a DS loop, granted mine clears my BMR driveshaft loop just fine.
#5
Restricted User
Thread Starter
iTrader: (10)
Join Date: Feb 2007
Location: Jersey
Posts: 1,455
Likes: 0
Received 0 Likes
on
0 Posts
I went with a 3.75" CF shaft from PST, although I never asked what the power ratings were between the two. I think JR HAWK 9 (or something like that) on here went with the 3.25"...the 3.25" shaft would probably hold plenty of power, and give you a bit more clearance with a DS loop, granted mine clears my BMR driveshaft loop just fine.