San Diego Car Guy

I have a '68 Camaro with an LS3 and TR6060 out of a 2010 Camaro and am using Autometer gauges. The speedo isn't getting the pulse signal and won't calibrate properly. Thus when I drive the sweep arm and odometer read 0. The sweep arm is working great during calibration, but the odometer is reading 0 rather than counting the pulses.

How should I go about troubleshooting this issue? Can I put a voltmeter on the sender out of the TR6060?

TIA

San Diego Car Guy

Nobody replied, but I found a GPS speedo at Summit that works great. I highly recommend this option with computer controlled cars.

stevieturbo

You just need to know what sort of signal the Autometer expects. Only are two options really, hall/square wave or VR magnetic Sine wave.