Help Please 2010 Camaro
#24
Teching In
Thread Starter
Join Date: Mar 2012
Location: NC
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
The last pull was 725rwhp and 610rwtq with 9lbs of boost no meth yet. The guys at rpm said I can get higher but I have stock bottom end and they don't want anything to happen.
#25
TECH Enthusiast
Join Date: Nov 2004
Location: Tampa FL
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
#26
12 Second Club
iTrader: (14)
Join Date: Oct 2008
Location: Where The Money Is
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
We had a Dyno day not long ago with over 10 5th gens all with chargers either Maggie, whipple, or pro charger. None made over 660rwhp without meth
#28
TECH Enthusiast
Join Date: Nov 2004
Location: Tampa FL
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
#29
Teching In
Thread Starter
Join Date: Mar 2012
Location: NC
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
I've NEVER seen a 5th gen make that kind of power on a 9psi pro charger setup especially with no meth. I find it almost hard to believe
We had a Dyno day not long ago with over 10 5th gens all with chargers either Maggie, whipple, or pro charger. None made over 660rwhp without meth
We had a Dyno day not long ago with over 10 5th gens all with chargers either Maggie, whipple, or pro charger. None made over 660rwhp without meth
#34
TECH Resident
Join Date: Apr 2003
Location: here, ny
Posts: 859
Likes: 0
Received 0 Likes
on
0 Posts
#36
Teching In
Thread Starter
Join Date: Mar 2012
Location: NC
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
#39
10 Second Club
Join Date: Jul 2010
Location: Portsmouth,Va.
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
I have a procharger F1R running at 15lb. of boost and made 933 on the dyno yesterday on race gas getting tuned to trailer it to the superchevy show.
Ran a 10.57 off the bat. at 138.83
I advise you to get the bmr chassis brace to help the stiffness. I say this because my car with a combo of pfadt and bmr components is keeping the car straight thru the qtr.
Ken
Ran a 10.57 off the bat. at 138.83
I advise you to get the bmr chassis brace to help the stiffness. I say this because my car with a combo of pfadt and bmr components is keeping the car straight thru the qtr.
Ken