RsSean

iTrader: (27)

well first get a new clutch in my Camaro. Second is buy a roller 4th gen Camaro or Trans am and stuff a Duramax or a 8.1 litre big block it and roll out.

sway99bird

iTrader: (22)

A bunch of ****!!!!! Mainly get a new Camaro SS M6

Detoxx03

iTrader: (14)

Dude you haven't already been doing this?

jeremy02

09 To Dos/Don'ts:
--Get into the Marines
--Go to Iraq
--DON'T die in Iraq
--Use my Marine money to buy a 2010 SS with every ******* option available

Huggerorange73

iTrader: (5)

* Powder coat calipers & brackets
* LS6 intake swap
* 3:73 ring & pinion
* Full tune
* Look into lowering
* Wash,wax, enjoy............

lookin4aTA

Full exhaust-catback already on its way
depending on wether or not the guys from vengeance come outprobably do a fast92/92 set with a vrx5 otherwise i am going the LS6 route for now.maybe a new 9inch come the end of the year.

SweeTbone

iTrader: (8)

Being realistic, the only thing I'll get done is adding my UMI LCAs and PHB I just ordered and upgrading to a Textralia clutch and Tick Adj. MC. While I do need a 9" and a Torque Arm, making a big *** crazy "to do list" and trying to scrunch it in to a 6 month active period for my car is totally unfeasible, mainly because of finances. So I'll stick to clutch and LCA/PHB for 2009, and try to come out swinging with the 9" by mid year 2010.

'Trust'

iTrader: (24)

2009 To-Do List

For the Car
Move from a 3.7" Pulley to a 3.2"
Add an Alkycontrol Meth Kit
Make 780-800RWHP
Cover Interior with Leather/Suede/Carbon Fiber and add new seats
Maybe get new wheels
Done.

Other Stuff
Graduate College
Buy a new house
Take a month long vacation
Start working in a career

Unless something unforeseeable happens, the car should be complete by March - April which will give me a couple months to recover before graduating then doing the rest.

WS6 SRT-8

iTrader: (18)

1. Go on a diet
2. Put the TA on a diet
3. Maybe a 10.99 E.T.
4. Be politely asked to leave the track (no Roll Bar)

SladeX

Install the ported heads that I have in my garage onto my car. Install the 9 inch rear I bought into my car. Install the tick master cylinder I need to order into my car.

Run a 12 sec time consistently, not break **** anymore.

bobbyd

iTrader: (10)

lower car strano springs - getting in 2 weeks or so
ls6 intake
headlamp motor (drivers side)

and whatever else i think of later on.

SCott5

iTrader: (40)

get my car running.. lol

jrob56

iTrader: (39)

For the car:
-Install LS6 Intake and Ported TB(Powdercoated Red)
-Get new Nitto DR's(mine are shot) and roll fenders
-Find out reason for brake noise(full brake job including powdercoated calipers, hawk pads, new rotors if neccessary)
-Get TSP Duals with Dynomax bullets
-Get a full tune at GLM
-Trade my chrome zr1's for some black zr1's
-Fix my cloudy *** headlights
-Get an SLP Bowtie Grille
-Tint

Other:
-Keep up a good GPA
-Further develop my resume
-Get an internship

Im sure we all share this one!

poopshootSS

lid
replace all speakers
tint
gmmg full exhaust
LT
3.73
SLP bowtie grille
tune
upgrade brakes
DONE...................maybe a 100 shot lol

gpainnt

finish cam install

nemss1

haha love the chick answers!

for the car:
-headers & ORY
-install my 3.73s
-underdrive pulleys
-full BMR suspension

for me:
-move into my house
-get pro motoX track done
-get along with the fiance (first)
-marry the bia (2nd)
-and pop out another hoping its a boy!

1BAD_LS1

iTrader: (36)

Pacesetter Long Tube LS1 Headers, Ceramic coated
Texas Speed Rumbler X True Duals
Precision Industries Vigilante Lock-Up Converter
Perma Cool 20-22000 GVW Transmission Cooler
Spohn Tubular Subframe Connectors
25% Underdrive Pulley/Alternator overdrive pulley
K&N F-Body Air Filter
LS6 Intake
MSD 8.5mm Spark Plug Wires and new plugs
12 bolt rearend
Built 4l60e
Hypertech LS1 Low Temp Thermostat
SLP Brake Control (Line Lock)
Precison Race Components Stg 2.5 5.3L Heads & Cam + Ported oil pump, timing set, push rods, and gasket set
Trans Temp/Air Fuel Guage in vents
New Rims and Tires
Dyno TUNE
New Head unit/Component speakers/amp/subs

Hopefully Done in 2009! LOL...kinda looking for a house also.

Spd-Kilz

iTrader: (35)

Purchase and install all needed parts for a full Heads & Cam swap.
Fast 90/90
Get car tuned
6 point cage
Break rear end

the_merv

iTrader: (88)

Put the Car back together and getting it Tuned to complete the T56 Swap.

Actually enjoy it on the road without it being broken.

green28

iTrader: (8)

Here's what I'd like to do.
Stall w/ tranny cooler
M/T ET Streets
retint windows
new pads and rotors
new grille

But since we want to look at selling our house and getting a bigger one this is probably all I'll end up doing.

Fix pinon seal leak and install 3.73's while I'm in there.
Wax car and clean rims up.
FTRA

Or just sell the car and winter beater and buy an AWD TBSS and do a few bolt-on's.