weiand 142 on ls1??
I don't think Weiand makes a lower intake to bolt that blower on an LS1. Also, if that's going on a F-body it would take some serious firewall modification for it to fit. What carb you plan on running on the top of it?
fab up a plate that goes on the bottom side so you can have the blower mounted to the side of the engine. like where the ac is or something. the have fresh air coming in and boosted air coming out. run the piping like a centrivical supercharger. but that would be a lot of fabricating. you would have to make a mounting bracket for the blower. just an idea.
Thread Starter
On The Tree
Joined: Oct 2008
Posts: 109
Likes: 0
From: wausau wi
ok thanks guys im just looking for ideas i do metal fabrication for a living so im not real worried about needing to fab anything. and i will need to research what carb to run any suggestions for that?
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
TECH Apprentice
iTrader: (5)
Joined: Dec 2007
Posts: 347
Likes: 0
From: Southern Colorado Front Range
fab up a plate that goes on the bottom side so you can have the blower mounted to the side of the engine. like where the ac is or something. the have fresh air coming in and boosted air coming out. run the piping like a centrivical supercharger. but that would be a lot of fabricating. you would have to make a mounting bracket for the blower. just an idea.
