VIN information
VIN information Its been a while but if im not mistaken there is a way to look at the sticker in the door to tell what gears you have. I just purchased a lil 01 Z and wanted to know what ratio came in the car.
Also wanted to know where to look on the heads to tell what cast they are without taking them off the car.
Finally wanted to know if there is a way to tell if I have an LS6 intake without taking it off and looking under the bottom.
Thanks in advance. I hope this is the right section.
Also wanted to know where to look on the heads to tell what cast they are without taking them off the car.
Finally wanted to know if there is a way to tell if I have an LS6 intake without taking it off and looking under the bottom.
Thanks in advance. I hope this is the right section.
11 Second Club
iTrader: (27)
Joined: May 2005
Posts: 6,799
Likes: 5
From: Your girl's back door giving her the long stroke while you're at work
If no one messed with the car it SHOULD have 241 heads and a LS6 intake from the factory.
Look on the passenger side head at the lower front, the casting number will be there. See the pic below. And for the intake, there will be a part number on the driver's side in the middle.
Look on the passenger side head at the lower front, the casting number will be there. See the pic below. And for the intake, there will be a part number on the driver's side in the middle.
