loooking for a new cam, have some ????'s
12-29-2010, 11:09 AM
#1
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Dec 2007
Posts: 1,541
Likes: 0
Received 0 Likes
on
0 Posts
loooking for a new cam, have some ????'s so i have a 1998 camaro z28 with 80k miles. runs very good now with my baby cam,but looking to step it up just a bit.currently the mods are 241 heads, custom cam 232/228, 603./.598 110 lsa. built 4l65e with 4k stall, 3.73 gears. with this set up it has gone 11.6 at 116mph. not bad for a car that put down 339rwhp through a unlocked converter.
so now i want to swith to a larger cam, 243 heads, and a fast 92/92 set up.
i was thinking about the tsp ms3 and or ms4 cams. how would driveability be with my stalled auto. any cams you would suggest.
i am also worried that if i get a bigger cam, i will run a slower et???
any help would be greatly appreciated..
so now i want to swith to a larger cam, 243 heads, and a fast 92/92 set up.
i was thinking about the tsp ms3 and or ms4 cams. how would driveability be with my stalled auto. any cams you would suggest.
i am also worried that if i get a bigger cam, i will run a slower et???
any help would be greatly appreciated..
Last edited by pozesd99'; 12-29-2010 at 11:25 AM.
12-29-2010, 06:20 PM
#2
12 Second Club
iTrader: (12)
Join Date: Oct 2007
Location: Dayton, Ohio
Posts: 1,340
Likes: 0
Received 0 Likes
on
0 Posts
If you are happy with the drivability of your cam now, I wouldn't make the swap. The cam you have now is a decent sized cam. I'm not sure you would see huge gains by switching to an MS3 or MS4. I would get the heads and intake and enjoy!
