just bought a cam need help
02-19-2011, 01:50 PM
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: des plaines IL
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
just bought a cam need help Hey guys so I just bought a new Texas speed ms4 cam for my 2000 trans am ws6. I want to know that what I need to get in order to support this cam for the car. Right now I have long tubes and full exhaust on the car any info I really do appericent it.
02-21-2011, 12:11 PM
#6
12 Second Club
iTrader: (5)
Join Date: Nov 2008
Location: Kansas
Posts: 458
Likes: 0
Received 0 Likes
on
0 Posts
Is the car an M6 or A4? You'd want at least 4.10s in an M6 and at least a 3600 stall in an A4. You also need new springs and pushrods. A new oil pump and timing set would also be a very good idea. If you don't have an ls6 intake I would look into that as well. Get the supporting mods you need first and don't ghetto the install. Do it all right the first time. If you spent a solid hour of researching the site you could easily find out what others are running and what works good with this cam. Tons of info about the MS4 on here.