Advise,thoughts,and opinions on a built 6.0 with twins
06-23-2011, 10:23 AM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Jun 2011
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Advise,thoughts,and opinions on a built 6.0 with twins Well like it says give me your advice,thought,and opinions on this...
What I am doin is picking up a 6.0 longblock with torqer v2 cam on a 114 ls,bigstuff ls1 efi with gm transcontrol and datalogging,A1000 pump and reg,55lb inj (will go bigger),Big red ls1 fuel rails,and 2 t66mm eBay special's....
What i need to finish the powertrain ls1/6 intake,tb,roller rockers,and pushrods. The stock rods and pistons are comming out for scat hbeam 6.123 with dss gsx dish pistons arp main and head studs....next big thing should I stay running 317 and what kind of times and numbers should I see on 20-25lbs of boost......thanks ls1tech
What I am doin is picking up a 6.0 longblock with torqer v2 cam on a 114 ls,bigstuff ls1 efi with gm transcontrol and datalogging,A1000 pump and reg,55lb inj (will go bigger),Big red ls1 fuel rails,and 2 t66mm eBay special's....
What i need to finish the powertrain ls1/6 intake,tb,roller rockers,and pushrods. The stock rods and pistons are comming out for scat hbeam 6.123 with dss gsx dish pistons arp main and head studs....next big thing should I stay running 317 and what kind of times and numbers should I see on 20-25lbs of boost......thanks ls1tech
06-23-2011, 10:29 AM
#3
Teching In
Thread Starter
iTrader: (1)
Join Date: Jun 2011
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Another thing what size intake and tb is recommended for me...can I go with .20 over bore.. And if yes what will be final cubic in .20 over with 6.123 rods and stock stroke? Thangs agian
