bad_408_vert

iTrader: (6)

New shocks, sfc
Hid/led lighting where applicable
Custom iPad headunit/car pc
Fresh paint

lees02WS6

iTrader: (5)

I'm going to disassemble the suspension and exhaust. The manifolds and catalytics I'm going to get coated. The exhaust I'm going to use a da to give the stainless a brushed finished. The half shafts i'm going to chromed,, and the front suspension I'm going to powder coat silver to match the rear.

I'm also going to use POR15 silver to undercoat the car, but I'm thinking of top coating it as I've heard that the silver por 15 streaks and turns green.

carguy_24

I'll be installing the 3pt sfc... can't wait to get them.
Besides that I'll be saving money for a Lq4/9 and saving for a trip to some spring training baseball games.

mean_greenZ

iTrader: (1)

My plan is to drive mine and enjoy it and keep it as clean as possible. And maybe bolt a turn-down tip on my cutout

bestlude

iTrader: (4)

Ordered my complete Ring and Pinion install kit from Richmond. SHould get my 4.10's in also getting suspension parts (Panhard bar, LCA's, Rear Sway bar) cant wait..

mcalus

iTrader: (14)

Once I get the 355 LE cammed shortblock back from the machine shop, order a bunch of goodies and put it all back together

Lord_Vaders_Hawk

iTrader: (5)

I ordered a couple of suspension pieces. Looking forward to handling a little better. Wouldn't mind a nitrous kit

JOHN STEPHENS

Im planning putting mine on the dyno in the next few weeks. Then some spray, and drive her till winter hits. Then clean her and put her away.

ANTICOP RAM AIR

iTrader: (7)

Try not to wreck it...

82cetuner

iTrader: (9)

hmm lets see if I can list it all lol

418 ls3 long block with ported ls3 intake
92mm tb
1 7/8 headers
tick master
monster 3 clutch
strano springs
koni shocks
strano swaybars
brake system upgrade
MWC 9 inch with wavetrac
watts link
line lock
magnaflow catback
custom made y pipe with cutout

think that about sums it up LOL theres alot of small odd and end stuff im going to need to do the swap but i have aquired most all these parts exept the rear end so far

Rare96LT1Formula

iTrader: (32)

Over winter - Monster Stage 2 Clutch Package with lightweight billet flywheel, upgraded z06 slave cylinder, tick adjustable master cylinder.

Tax time - Headers/Y-Pipe, LS6/Fast 90, 4.10 gears

PewterScreaminMach

iTrader: (7)

I plan on running a 10.X bone stock on this little 600 at LVD in good air. October 14th rental. By that time, it'll probably be getting too cold to do much normal street riding, but I suppose that's what my winter gear is for.

+badss+

iTrader: (12)

shocks/springs,abs delete/linelock,cam,n20,tune

AmarilloWS6

iTrader: (3)

I guess this would be winter since it's Christmas, but with the heat wave we've been having in Amarillo it might still be fall in December, but I'm getting my black z06 wheels for my ws6!

kammi10

iTrader: (5)

now your just dreaming again.. lol

mcalus

iTrader: (14)

Lol you beat me to it! I was going to say rumor has it you won't be...haha!

Lord_Vaders_Hawk

iTrader: (5)

After seeing some of your posts up here. I might have to consider some things. Are the LCA's worth getting for a DD that see minimal drag time?

Syris

iTrader: (1)

Electric cutout
lid
intake
springs & struts
heads / cam

SM105K

iTrader: (3)

Let's see.......in the next couple of weeks it my SS is getting a Monster stage 3 clutch.

Then:
Hurst Short Shifter
HP Tuners
LS6 intake
LT's
ORY
Magnaflow Cat Back
NicD tune
Then maybe

4.11's.

JohnS Z28

iTrader: (1)

hope it makes it that far....