Can i spray my LQ9/L92 motor ?
11-05-2011, 02:25 PM
#1
10 Second Club
Thread Starter
iTrader: (3)
Join Date: Oct 2011
Location: Venus (DFW) TX
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Can i spray my LQ9/L92 motor ? Want to get a couple opinions about spraying my new motor if i can. Here is my combo.
LQ9 STOCK bottom 20k miles
L92 heads ported, milled .020 with Manley springs
Comp custom grind 227/239 .614/.624 114 LSA
LS3 intake ported with 90mm Edelbrock TB
Longtube headers with true duals x piped and dumped
Will be having a friend do the tune with HP tuner
Car is a 99 SS M6
Anyway i have a 175 wet shot system to put on the car if the stock cast flat tops will handle it. Have been told they will, but honestly i think im gonna be pushin it as it is with no juice. Any opinions will help me out
Also any guesses on what kind of power i should expect from this setup ?
LQ9 STOCK bottom 20k miles
L92 heads ported, milled .020 with Manley springs
Comp custom grind 227/239 .614/.624 114 LSA
LS3 intake ported with 90mm Edelbrock TB
Longtube headers with true duals x piped and dumped
Will be having a friend do the tune with HP tuner
Car is a 99 SS M6
Anyway i have a 175 wet shot system to put on the car if the stock cast flat tops will handle it. Have been told they will, but honestly i think im gonna be pushin it as it is with no juice. Any opinions will help me out
Also any guesses on what kind of power i should expect from this setup ?
Last edited by SSLSXLQ9L92; 11-11-2011 at 03:46 AM.
