Spun Bearing Machine shop cost
09-18-2014, 10:31 PM
#1
Teching In
Thread Starter
Join Date: Aug 2014
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Spun Bearing Machine shop cost Hi guys. I dropped my 6.0 short block off at the machine shop and told them what I wanted done. I said I'd like to reuse as many parts as possible. The motor will be boosted so I asked for a 28 ring gap on top, and 30 on bottom. Obviously if the crank can be salvaged from the suspected spun bearing I would reuse that along with the rods.
My question goes out to experienced guys who are familiar with machine shop cost. With disassembly, new bearings, new factory rod bolts, turning and polishing the crank, and reassembly what kind of ball park cost might I be looking at?
My question goes out to experienced guys who are familiar with machine shop cost. With disassembly, new bearings, new factory rod bolts, turning and polishing the crank, and reassembly what kind of ball park cost might I be looking at?
09-23-2014, 08:59 PM
#4
i do - no LOL about that from me... lol
