Might Have messed up my slave cylinder
#1
Might Have messed up my slave cylinder
Alright guys, I was doing a clutch job on my car. While removing the transmission I ran into the issue of freeing the slave cylinder line up. The white clip that pushes forward and frees the line was broke all to pieces on my car so it was virtually ineffective. While trying things out to see if I could free it up, I was moving the tranny back and forth to get a better angle and while doing so I popped the line loose that goes directly into the slave cylinder, and of course I lost some fluid in the process. Will I have to replace my slave cylinder due to this? Or can I pop it back in place when putting my transmission back in?