Lq4 with ls1 heads, is it any good??
10-08-2018, 02:50 PM
#1
Teching In
Thread Starter
Join Date: Nov 2017
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Lq4 with ls1 heads, is it any good?? So I'm building a budget drift car, I recently got a 2006 lq4 with 7k miles, it didn't come with heads , but I also have a set of ls1 heads laying around that I can use and I'm strictly limited to those heads, I will do some hand porting later on, but my question is if it's a decent combo, I would love to get some 243 heads , but for my application being a drift car, I don't see a point. I could have them milled if needed, So what type of hp, compression should I see, I was hoping for 400rwhp + with stock ls1 heads, getting the ms3 cam or something similar, and a ported ls6 intake, 90mm tb . Any input is appreciated, lmk what y'all think
10-18-2018, 10:04 AM
#3
I agree with KCS.
For that application welding up the LS1 chambers to get more compression might be worthwhile. Advanced Induction can do that for their ported LS1 heads. I don't know if they offered just welding up the chambers and CNCing just the chambers.
For that application welding up the LS1 chambers to get more compression might be worthwhile. Advanced Induction can do that for their ported LS1 heads. I don't know if they offered just welding up the chambers and CNCing just the chambers.