new-style PCV
#4
Joined: Nov 2001
Posts: 32,395
Likes: 1,818
From: Schiller Park, IL Member: #317
I think what BLKWS.6 is asking about is the revised GM PCV valve that was issued for the trucks I beleive. There is no actual 'valve' inside, just a much smaller orfice than the stock valve.
If so, I tried this in my '00 car, frankly it didn't seem to make any difference. Doing the verticle PCV mod seemed to do more (and even that wasn't a big difference).
My WS6 started using a lot of oil after the cam swap. I think it was a combo of the stock low tension rings with increased cylinder pressure from the cam and the higher stall TC keeping the revs higher with light load on the motor.
If so, I tried this in my '00 car, frankly it didn't seem to make any difference. Doing the verticle PCV mod seemed to do more (and even that wasn't a big difference).
My WS6 started using a lot of oil after the cam swap. I think it was a combo of the stock low tension rings with increased cylinder pressure from the cam and the higher stall TC keeping the revs higher with light load on the motor.