The worst?
Thread Starter
TECH Enthusiast
Joined: Dec 2006
Posts: 564
Likes: 1
From: Powder Springs, GA
The worst? What is the worst injury that you have done to yourself while working on a vehicle?
to start it out...yesterday i was working on my room mate's car, pulling out the rearend....wrench slipped off the bolt and hit me in the eye...i had a bloody nose, a cut on the back of my head from the wheel well, cut on my hand from my teeth, scraps on my knuckles, and a massive shiner...ended up going to the ER just to make sure i didnt break anything or have a cuncussion...
to start it out...yesterday i was working on my room mate's car, pulling out the rearend....wrench slipped off the bolt and hit me in the eye...i had a bloody nose, a cut on the back of my head from the wheel well, cut on my hand from my teeth, scraps on my knuckles, and a massive shiner...ended up going to the ER just to make sure i didnt break anything or have a cuncussion...
Thats pretty bad! A lil funny though! I think the worst I've had is just cuts from under the cowl. Here's a couple I saw/heard about thought; when we were tightening my pulley back, I was holding the flywheel and my friend was tightening it, well I lost the flywheel and his elbow whet flying into the strut tower, I thought it was funny. I also heard (this one isn't funny) about a guy here in the city that was working on his car underneath the rear, some guy kicked the jack stand while they were trying to get them in a better spot with the rear supported with a jack, well when the stand moved the jack gave out and the rear dropped on his head, pretty messed up.
I was trying to pound chrome wheel weights on a crome Lexus GX470 wheel. I miscalucated the swing and the hammer came down right on my pointer finger on my left hand. It ended up cutting it in two spots and was black and blue for about two weeks. I could feel my heart beat in that finger for about the next 2 hrs. Hurts just to think about.
I was jacking up my old 86' monte with the factory jack (the kind where the tire iron goes into) and the tire iron slipped out just as the car was almost done getting jacked up. I punched the ground with all my weight. My knuckles and fingers lost most of the skin on them and wouldnt stop bleeding.
Or the time I accidently slammed the monte's door on my finger. Almost lost a fingernail with that one. Oh well, that car was a trip.
Or the time I accidently slammed the monte's door on my finger. Almost lost a fingernail with that one. Oh well, that car was a trip.
Another guy and I were welding the female part of some dzus fasteners on our FSAE car in college. I slipped holding it and got a pretty sweet burn on the back of my hand. About a year later, we were making a seat pan and heating it with a torch. He slipped and put his hand right in the open flame. Burned him really bad.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo