The Postman

iTrader: (44)

I was just wonderin if someone could give me a estimate of the HP i would make with the future mods i have listed in my sig...thanks

Starz T/A 17

iTrader: (6)

Thats really general saying just a cam, Alot of it depends one what kinda cam, what/how much you port the heads....exc

The Postman

iTrader: (44)

the ZO6 cam..thats why i have LS6 intake/cam/valve springs in the sig....as for the heads...im not sure, i'll prob go with a good relatively extreme grind on them so i can get the most flow out of them....most of these parts are already on their way so I can install them during the summer...im just lookin to see what i can expect to make..i figured with everything and a good tune...maybe somewhere North of 400 to the rear wheels...sound about right??

LS1Formula01

iTrader: (1)

i would say off the bottle, just shy of 380-400 at the wheels, on the bottle, just shy of 460, (static/drivetrain losses)

LS1Formula01

iTrader: (1)

with an a4 however, i would get a stall to put the power to the ground a little bit better