Whats your best 60' on a stock stall?
#1
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Jan 2007
Location: wentzville, MO
Posts: 914
Likes: 0
Received 0 Likes
on
0 Posts
Whats your best 60' on a stock stall?
Post up your best 60 foot time while running the stock stall, as well as the mods that helped get it there, and your gears.
Also if you have any tips on quicker short times...feel free
I'll start: My best is a 1.95 ...3.23 gear, BFG DR's at 16 psi, before i couldn't get quicker than a 2.01 until i added 2* of base timing with my timing tuner.
I pulled my sway bar the other day and hopefully with a few more runs under my belt i can get her down into the 1.8's
Also if you have any tips on quicker short times...feel free
I'll start: My best is a 1.95 ...3.23 gear, BFG DR's at 16 psi, before i couldn't get quicker than a 2.01 until i added 2* of base timing with my timing tuner.
I pulled my sway bar the other day and hopefully with a few more runs under my belt i can get her down into the 1.8's
#6
TECH Regular
iTrader: (2)
Join Date: Feb 2006
Location: NC
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
2.0..everytime on BFG drag radials..Thats with my 2.73's..and with my 3.42's..I just cant get any better than 2.0. My only time though at the track with the 3.42's was a hot *** day..it was like 95 degrees in orlando florida..so idk if on a cooler day it would do any better with the 3.42's. I have a performabuilt level 1 with a 3K stall on the way so hopefully i can drop those 60' times down a bit...and hopefully my 2nd 10 bolt will hold up..