Crimsonnaire

iTrader: (1)

Crap. Looks like I'll be sharing another close encounter with the insects.

Would you happen to know the AutoZone part number for the bulb that these sockets take? At first, it looked like they took the same Sylvania bulbs, but the plug turned out too wide.

Thank you for your help.

OMGWTFBODY

iTrader: (5)

85881

Is the O'Reilly part number as well. I sold them to a neighbor for his camaro. It is the standard GM socket for 3157/3357 bulbs

campbellshotrods

iTrader: (1)

Just FYI, I bought the socket from Autozone, but I was reluctant to cut into my original wiring harness to splice in a Chinese part, nor was I gonna spend $40 for a GM unit. So I grabbed my spare front turn signal, and set off for Pick N Pull. Didn't take me long at all, but I found a turn signal socket out of the last generation Lumina that fit the lens. It was not the DRL for that car, so it was still in mint shape. I got it home, took it apart, and everything swapped right over! Didn't have to splice anything! And it only cost me $3.00!

qwk93ta

iTrader: (13)

I did not cut my wires either....I pulled apart my Autozone socket and replaced the wires.

Chhh Chhh

iTrader: (2)

mine ago out all the time. i finally took out my DRL's// and i will end up changed my actual signals and what not so no water gets in..