General Maintenance & Repairs Leaks | Squeaks | Clunks | Rattles | Grinds

SES Light diagnosed!

Thread Tools
 
Search this Thread
 
Old 11-04-2008, 09:57 PM
  #1  
Staging Lane
Thread Starter
iTrader: (4)
 
NateHale88's Avatar
 
Join Date: May 2008
Location: Springport Michigan
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Default SES Light diagnosed!

So I took it to Auto Zone and had the light diagnosed!


I actually had 3 come up.

p0171
p0174
p0507

I have a ported and polished tb, ported and polished maf, and slp lid.

My idle surges a little bit from about 900 and spikes to 1000. No loss of power or anything and it ran a 13.1 last Saturday so I'd hope if I can figure these out it will be faster yet??

It says something about running lean in banks 1 and 2... and something about malfunctioning IAC sensor??

Any input? Thanks!
Old 11-04-2008, 10:03 PM
  #2  
Teching In
 
93LEETZ's Avatar
 
Join Date: Aug 2007
Location: South Jersey
Posts: 41
Likes: 0
Received 0 Likes on 0 Posts

Default

I'm guessing the IAC is causing the idle surge lol
Old 11-05-2008, 06:19 PM
  #3  
TECH Resident
iTrader: (1)
 
Formula413's Avatar
 
Join Date: Dec 2006
Location: Western Mass
Posts: 911
Likes: 0
Received 1 Like on 1 Post

Default

Check that MAF, if it was damaged it could be causing a lean code. Also check for vacuum leaks, starting with your PCV line.
Old 11-05-2008, 09:46 PM
  #4  
On The Tree
 
biggb1783's Avatar
 
Join Date: May 2008
Location: philadelphia area
Posts: 118
Likes: 0
Received 0 Likes on 0 Posts
Default

if it is surging, you most likely have a large vacuum leak hense p0171/p0174, the idle air motor is going crazy trying to smooth the idle and is most likely out of the operating range of the iac. possible intake leaks??? have you done anything to it recently?




All times are GMT -5. The time now is 08:46 PM.