2 issues need help on

Reply Subscribe

Thread Tools

Search this Thread

Sep 16, 2009 | 01:27 PM

ta6.66litre

Thread Starter

Teching In

Joined: Dec 2005

Posts: 4

Likes: 0

2 issues need help on

first off when I start my car in the morning my volts are fine. But when I start the car after that, the volts dim and the lights tend to flicker at idle, and then again at WOT. When the car is at idle the car makes a whistling noise as well, Does this sound like a problem with the belt?

Next question is what tools are required to take out the o2 sensor and replace it? put back in?

thanks for any help

car is 2000 z28

Sep 16, 2009 | 01:50 PM

nemss1

12 Second Club

Joined: Jun 2008

Posts: 2,585

Likes: 3

From: Edmond, OK

Use an open-end wrench for the o2's

Sep 16, 2009 | 04:36 PM

jts98z28

TECH Apprentice

iTrader: (18)

Joined: Mar 2008

Posts: 302

Likes: 0

From: nj

did 2000 still have egr?...if so u mite wanna check out where it connects to the intake cause i had a similar issue and it was my o-ring wasnt in right

Sep 16, 2009 | 04:43 PM

nemss1

12 Second Club

Joined: Jun 2008

Posts: 2,585

Likes: 3

From: Edmond, OK

yes, 2000 still has EGR

Sep 16, 2009 | 04:59 PM

1sick'98WS6

TECH Fanatic

iTrader: (19)

Joined: Jan 2005

Posts: 1,034

Likes: 1

From: Phoenix AZ

use a large crecent wrench or a pair of channel locks if you do not have the correct size boxed end wrench ( for the 02s that is)

Sep 17, 2009 | 03:38 PM

ta6.66litre

Thread Starter

Teching In

Joined: Dec 2005

Posts: 4

Likes: 0

Quote:

Originally Posted by jts98z28

did 2000 still have egr?...if so u mite wanna check out where it connects to the intake cause i had a similar issue and it was my o-ring wasnt in right

what problem did that create for you?

Reply Subscribe

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Reply Share

First
Prev
1 / 1
Next
Last