bboylastik

First off i have never built an engine before. Ok so im doing an ls1 swap on my 240. Since i had the engine on a stand i figured i would replace the cam, springs, and rod bolts. I tore it to a short block. I sprayed everything with tons of brake cleaner. I put the new springs cam and rod bolts on. Since i cleaned everything with brake cleaner, before i just throw it together, do i need to grease or oil anything or check anything? Please any tips or suggestions would be helpful. Thanks guys

Anthony Williams

iTrader: (3)

Too much detail for a thread, Get yourself a copy of "How to build hi performance LS1/LS6 V8s"