FAST 90 complete hardware kit.....not complete :(
#1
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Jul 2007
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
FAST 90 complete hardware kit.....not complete :(
I ordered this stainless set to replace the rust hardware on my FAST 90....took the manifold apart, cleaned and installed new seals then opened the box to find that the little torx screws that hold the runners to the lower half were not there. Of course I had pitched all the old hardware during the cleaning phase so now im SOL. I guess I assumed too much in that the complete kit would be complete. Am I missing pieces or do these little screws not come in the complete kit? Part number 54038c-kit I think I could skip installing them as the runners are RTV'd to the lower half and the shells when bolted together would make it impossible to go anywhere but......any help appreciated
EDIT: also noticed the EGR screw is also not include
EDIT: also noticed the EGR screw is also not include
Last edited by BOA279; 10-10-2010 at 12:23 PM.