Need some help
Thread Starter
Teching In
Joined: Dec 2010
Posts: 22
Likes: 0
Need some help i gotta 98 camaro and gotta set of 317 heads off a 6.0 truck that have been ported and polish wat will be a nice setup to go with to make some nice hp....im lookin to make about 380-400hp what are some reccomendations with out spendin too much
I had ablong paragraph typed for u and accidently deleted it, I'm on my phone so not typing it again..
226/228 .588 114 is what I run.. you need to get those milled as well.. check ptv clearance when installing. That cam with milled ported 317s ls6 intake exhaust and lid will net you 380+rwhp easily and you can run very quick, see sig.
I am assuming a4.. if m6 you will put down over 400 easily.. that cam will have awesome street manners.
226/228 .588 114 is what I run.. you need to get those milled as well.. check ptv clearance when installing. That cam with milled ported 317s ls6 intake exhaust and lid will net you 380+rwhp easily and you can run very quick, see sig.
I am assuming a4.. if m6 you will put down over 400 easily.. that cam will have awesome street manners.
