Cruise and TCS quit at the same time

Reply Subscribe

Thread Tools

Search this Thread

Feb 1, 2011 | 07:37 PM

topfig1

Thread Starter

TECH Regular

iTrader: (5)

Joined: Nov 2001

Posts: 475

Likes: 2

From: San Diego CA

Cruise and TCS quit at the same time

My cruise quit working and traction control started acting up at the exact same time. Anyone else have this problem and does anyone have an idea what it could be?

Angel

Feb 4, 2011 | 04:57 AM

rdd014camaro

On The Tree

iTrader: (8)

Joined: Jun 2009

Posts: 106

Likes: 1

From: Fort Worth, TX

I had a similar problem with mine. Cruise didn't work and traction control would go out. There is alot of things that can make these go out... Third brake light out, faulty clutch or break peddle switches. Mine turned out to be my EBCM(electronic brake control module). One of the relays was going bad in it. Not a cheap fix ether haha. Anyways if you have a reasonable shop in mind that has a scan tool they should be able to tell you exactly what it is. And it can't be just a regular obd2 scanner. It needs to be one of the expensive ones

Feb 4, 2011 | 05:52 AM

eseibel67

TECH Fanatic

iTrader: (10)

Joined: Feb 2008

Posts: 1,781

Likes: 4

From: Kitchener, ON

Check the TCS fuse and the stop/hazzard fuse.

Reply Subscribe