'01 WS-6 intermittent stalling and power loss
#21
Teching In
Thread Starter
Join Date: Aug 2010
Location: SF Bay Area
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The MAF is used for cold engine start and WOT....and from what I'm learning from a couple tuners it comes into play at NEAR WOT settings too........so if you're just cruising the MAF isn't going to stall the engine out, not even if it totally fails 100%.
You might want to run this problem by the PCM gurus in the "PCM Diagnostics and Tuning" section.
.
You might want to run this problem by the PCM gurus in the "PCM Diagnostics and Tuning" section.
.