General Maintenance & Repairs Leaks | Squeaks | Clunks | Rattles | Grinds

Lt1 vibration

Thread Tools
 
Search this Thread
 
Old 02-28-2012, 01:59 PM
  #1  
Launching!
Thread Starter
 
KyleW707's Avatar
 
Join Date: Oct 2011
Location: CenTex
Posts: 253
Likes: 0
Received 0 Likes on 0 Posts
Default Lt1 vibration

Lt1 vibration. Alright guys, i have an automatic 97 z28 with 108xxx miles. Since I bought it (6 months ago), it has had this vibration. It occurs at around 2k-3k rpm range in any gear including park. In drive starts at around 50 mph and gets.noticeably worse when decelerating, for example; going 70 with cruise control on then turning it off and coasting. I've ruled out rear end obviously, and transmission because i currently have it pulled but it still vibrates, so im left with the engine. The only mods that i know of to the engine are a cold air intake, edelbrock throttle body and headers, and underdrive pulley, also probably has a tune because it shifts out of first so quickly (i can put it in drive, let it idle and it will shift into second within 10-15 seconds) so what do yall guys think? Something external or internal? Thanks in.advance. -Kyle
Old 02-28-2012, 11:17 PM
  #2  
myk
TECH Fanatic
iTrader: (4)
 
myk's Avatar
 
Join Date: May 2007
Location: Sun Diego
Posts: 1,883
Received 13 Likes on 10 Posts

Default

Maybe the UDP pulley is loose, out of round or something? Also, I don't know of any proper tunes that make the car shfit when it's just standing still...
Old 02-29-2012, 09:23 AM
  #3  
Launching!
Thread Starter
 
KyleW707's Avatar
 
Join Date: Oct 2011
Location: CenTex
Posts: 253
Likes: 0
Received 0 Likes on 0 Posts
Default

I checked the pulley and its not loose. I meant when i put it in drive and take off, like when i let my foot off the brake and just let it roll lol my bad should have been more clear




All times are GMT -5. The time now is 11:54 AM.