P0443/P0449,fuse popped,but....
05-22-2012, 02:03 PM
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Mar 2012
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
P0443/P0449,fuse popped,but.... Hey guys, I need to figure out why the Eng Control fuse popped on my 98 Z28, I cant pinpoint when it happen do to me doin various work but. I know these are Evap related codes, but where exactly should I be looking? In car or under car?
I do have a P0133/P053 (the O² codes) but im sure those are from needing a new tune after the LTs.
I noticed this code after I installed my stereo (but it could of been there for a few days before) I ran wires on driver side and screwed amp down in the cubby well off to driver side,but I didnt see any obvious signs of wires cut.
Also replaced fuse 1x and noticed it was popped today, I replaced it on lunch and have 2 hot/cold cycles so far and its still holding.
I also was repairing/diagnosing abs-trac control around stereo time, (frayed abs sensor wire,fixed) and I noticed a braided ground strap severed on engine driver side. Related?
Ill be under her today and kinda need a general area where to stick my nose.
I do have a P0133/P053 (the O² codes) but im sure those are from needing a new tune after the LTs.
I noticed this code after I installed my stereo (but it could of been there for a few days before) I ran wires on driver side and screwed amp down in the cubby well off to driver side,but I didnt see any obvious signs of wires cut.
Also replaced fuse 1x and noticed it was popped today, I replaced it on lunch and have 2 hot/cold cycles so far and its still holding.
I also was repairing/diagnosing abs-trac control around stereo time, (frayed abs sensor wire,fixed) and I noticed a braided ground strap severed on engine driver side. Related?
Ill be under her today and kinda need a general area where to stick my nose.
Last edited by 2muchspl; 05-22-2012 at 02:08 PM. Reason: left info out
