General Maintenance & Repairs Leaks | Squeaks | Clunks | Rattles | Grinds

brake light problem

Thread Tools
 
Search this Thread
 
Old 10-31-2005, 08:13 PM
  #1  
TECH Resident
Thread Starter
iTrader: (7)
 
z28_n_tx's Avatar
 
Join Date: Sep 2005
Location: TexaS
Posts: 894
Likes: 0
Received 1 Like on 1 Post

Default brake light problem

this is probably a minor thing but just wanted to see what was up with it... a few days ago i turned my car on and the abs inop and the asr lights were both on, so i turned the car off and on a couple of times but they kept sating on. i took it for a spin and 2 minutes in to the drive they went off and have not come on again...but when i go to set the hand brake, the light wont come on..however it does light upwhen i turn the car along with the rest of the panel.. any ideas???
Old 10-31-2005, 08:24 PM
  #2  
TECH Addict
iTrader: (2)
 
2K2WS6TA's Avatar
 
Join Date: Nov 2002
Location: Ark City KS
Posts: 2,938
Likes: 0
Received 1 Like on 1 Post
Default

For the brake light, look at the switch on the hand brake, if it's stuck in the off position the light won't light
The ABS/ASR light I've had it too, after doing a burnout, or dropping the front wheel off the side of the driveway , if it hasn't returned, I wouldn't worry about it
Old 10-31-2005, 08:35 PM
  #3  
TECH Resident
Thread Starter
iTrader: (7)
 
z28_n_tx's Avatar
 
Join Date: Sep 2005
Location: TexaS
Posts: 894
Likes: 0
Received 1 Like on 1 Post

Default

thanks ill check that out
Old 11-01-2005, 06:39 PM
  #4  
TECH Resident
Thread Starter
iTrader: (7)
 
z28_n_tx's Avatar
 
Join Date: Sep 2005
Location: TexaS
Posts: 894
Likes: 0
Received 1 Like on 1 Post

Default

messed with the switch and nothing happened.....




All times are GMT -5. The time now is 10:16 AM.