bogging down help!
#1
Teching In
Thread Starter
Join Date: Feb 2006
Location: Rochester, New York
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
bogging down help!
hey guys whats up? i recently got LT's and my O2 sensors went bad so i replaced those everything seems to be working right but sometimes when i am at a light or in first gear getting ready to leave the light my RPM's drop down to like 500-600? the weather is really cold like around 25-32 degrees i dont kow if this plays a part and also i didnt get it tuned could this be a problem. i didnt get it tuned because i am getting more stuff down to it so i thought i would wait let me know thanks guys!
#4
TECH Resident
iTrader: (4)
Join Date: Feb 2006
Location: Atlanta / Florida
Posts: 963
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 99LSGUN
to the top?
Unfortunately, I am not one of those people. I cannot chime in and say what is causing this definitely, but my guess would be you don't have an aftermarket lid? You are letting a lot of "air" out of the motor, but not enough in to compensate. But then again, a motor cannot expell more "air" than is consumed...It can only be the other way around. Meh...best luck to ya!