Need Real Quick Help
#1
Launching!
Thread Starter
Join Date: Sep 2004
Location: Orange County
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Need Real Quick Help
Its not a big deal but ive got this itch and i want to take care of it. SOOOOO....if you had to change out a o2 sensor because your car was running like **** and you only had one replacement.....what one would you (I ) change out. Thanks guys
#3
TECH Addict
iTrader: (61)
Join Date: Mar 2002
Location: USA
Posts: 2,304
Likes: 0
Received 0 Likes
on
0 Posts
You could get away with replacing only (1) if there was only (1) bad and you knew which one?
Try it in one side and see if the car runs better, if not, try it in the other side. It will take a few miles of driving for the car to relearn so if it still runs a little strange at the beginning - don't immediately think that you replaced the wrong one.
But if it was me - I'd replace them both...
-Jay-
Try it in one side and see if the car runs better, if not, try it in the other side. It will take a few miles of driving for the car to relearn so if it still runs a little strange at the beginning - don't immediately think that you replaced the wrong one.
But if it was me - I'd replace them both...
-Jay-
#5
Moderator
iTrader: (4)
Join Date: Nov 2003
Location: Plainfield, CT
Posts: 10,520
Likes: 0
Received 0 Likes
on
0 Posts
Use a code scanner and find out what it is. Bank 1 is the driver side, Bank 2 is the passenger side. The code will not reset itself that quickly. Use the scanner to erase the code after replacing the bad O2.