GM Says $550 for this..Thoughts?
#1
TECH Fanatic
Thread Starter
iTrader: (23)
Join Date: Nov 2003
Location: United States
Posts: 1,093
Likes: 0
Received 0 Likes
on
0 Posts
GM Says $550 for this..Thoughts?
hey guys,
my girlfriends 1999 3.8 camaro (130,000 miles) has been getting terrible gas mileage for a while now and its only getting worse. So we decided to take it to get checked out at a Gm dealership. Take in mind she has been throwing the EGR bank 2 code for weeks now. Ok, here is the good stuff: so we get a call today from them saying that here cars EGR valve is Stuck open and caused lots of carbon to build up in the intake, pistons, etc.. and that her fuel system needs to me cleaned. Here is there process..1) replace EGR Valve $300 before labor cost, 2) Clean out here engine, taking a machine and cleaning out the carbon build-up out????.. Here is my question.Can we replace the EGR valve ourselves with a part from autozone(138 bucks) and sea-foam the engine or will that not be enough? what are your thought?
my girlfriends 1999 3.8 camaro (130,000 miles) has been getting terrible gas mileage for a while now and its only getting worse. So we decided to take it to get checked out at a Gm dealership. Take in mind she has been throwing the EGR bank 2 code for weeks now. Ok, here is the good stuff: so we get a call today from them saying that here cars EGR valve is Stuck open and caused lots of carbon to build up in the intake, pistons, etc.. and that her fuel system needs to me cleaned. Here is there process..1) replace EGR Valve $300 before labor cost, 2) Clean out here engine, taking a machine and cleaning out the carbon build-up out????.. Here is my question.Can we replace the EGR valve ourselves with a part from autozone(138 bucks) and sea-foam the engine or will that not be enough? what are your thought?
#4
TECH Resident
iTrader: (9)
Join Date: Nov 2004
Location: Gulf Coast
Posts: 804
Likes: 0
Received 0 Likes
on
0 Posts
yes it threw EGR bank 2 code...I had no idea what that meant either, but apparantelty my valve was stuck open.. i just dont see a difference if i just seafoam the car myself than pay someone 300 bucks to do it theirselves....
#5
TECH Enthusiast
iTrader: (16)
Join Date: Aug 2005
Location: San Antonio, TX
Posts: 655
Likes: 0
Received 0 Likes
on
0 Posts
hell, for the EGR valve, I just took mine off, and pushed it in and out a few times with a pencil eraser, and it worked for another year or so (until I replaced the motor). Then just sea foam it.
#6
On The Tree
iTrader: (1)
Join Date: Sep 2005
Location: Michigan
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2001NBMZ28
"EGR bank 2 code" Not familiar with the V6's but doesn't sound right, maybe 02 code? What was the actual code #?
Trending Topics
#10
Granted their carbon cleaning is probably a bit more effective than seafoam, save yourself the $500 and do it yourself. It's a learning experience, and I'm sure the car needs it anyway.
#14
TECH Fanatic
Thread Starter
iTrader: (23)
Join Date: Nov 2003
Location: United States
Posts: 1,093
Likes: 0
Received 0 Likes
on
0 Posts
that was a thought, but I think the V6 system is diff. then on our cars.it can be deleted through the tune but the actual hardware will be on there. we just replaced to valve and are sea-foaming tommorow!! should be fun!
#17
TECH Fanatic
Thread Starter
iTrader: (23)
Join Date: Nov 2003
Location: United States
Posts: 1,093
Likes: 0
Received 0 Likes
on
0 Posts
sea-foamed it today...WOW lots of smoke..It was bellowing out for 15 mins while I let it idle..So, looks like we at least did something!! ill keep you updated on an improvement on gas mileage! we will see
#18
TECH Fanatic
Thread Starter
iTrader: (23)
Join Date: Nov 2003
Location: United States
Posts: 1,093
Likes: 0
Received 0 Likes
on
0 Posts
ok, guys i seafoamed her car and we didnt see much more better gas mileage ..maybe about 20 miles to her tank. Now I just used only half of the can..Is it safe to do it again with the other half of the can???