Installing Trans Temp gauge?
Installing Trans Temp gauge? Auto Meter's install instructions on temp gauges is a little vague. I've installed other gauges before, but never a trans temp gauge.
How would it install in my TA?
How would it install in my TA?
well you can put the sending unit in the pressure port about the selector on the tranny. and its pretty simple hookin it up. i can't really remember but one post is for the power wire, i think one ground and the other is for the sending unit. but make sure you don't touch the sending unit or the post on the guage to a hot wire or it could fry it.
Originally Posted by 2kta--89formula
Trending Topics
Originally Posted by NewCar
I used this guide & the only bolt in the area of this guide had tranny fluid come out when I took it out so back in that bolt went...
The sender will have to be "covered in fluid", so you'll need to put it somewhere that "fluid will come out" in order to get it to work. Be prepared to make a mess and get some extra fluid to top it off when you're done installing it (you may need several quarts).
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
