Front Light issues
Thread Starter
Registered User
Joined: Jul 2007
Posts: 31
Likes: 0
From: Westfield Mass
Front Light issues Alright, When my car is on and head lights are off both my front turn signals are lit up blinkers work, as soon as i turn head lights on driver side front turn signal shuts off but passanger one stays on (blinkers still work) just the solid yellow light stays out on driver side
Originally Posted by Greggy
bulb..dual filaments in them....
change it!
change it!
Thread Starter
Registered User
Joined: Jul 2007
Posts: 31
Likes: 0
From: Westfield Mass
the only time the yellow light driver side is out is when the head lights are on and when i unluck the car with the controler the passenger one blinks driver does not when headlights are on driver yellow is out passenger is on
Trending Topics
Thread Starter
Registered User
Joined: Jul 2007
Posts: 31
Likes: 0
From: Westfield Mass
Originally Posted by Starion
You might want to try pulling the socket out and cleaning it good. It's possible you got some moisture in there causing some corrosion.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
TECH Regular
Joined: Nov 2005
Posts: 457
Likes: 0
From: Boston, MA
did you test the bulb and socket with a multimeter. Could be a bad connection in the socket or a bad bulb, even if new. Check the lens housing and socket for cracks that could let in water. Use bulb grease to help keep water out of the socket.
I have replaced both len housings and bulbs many times. Recently have had to mess with the sockets and scrap them out to get them working. The heat will eventualy start to crack the plastic stuff.
The less bright stage of the bulb is where you are having a problem. This stage is not used for DRLs, turn signals and hazards, only for front markers when headlights are on.
I have replaced both len housings and bulbs many times. Recently have had to mess with the sockets and scrap them out to get them working. The heat will eventualy start to crack the plastic stuff.
The less bright stage of the bulb is where you are having a problem. This stage is not used for DRLs, turn signals and hazards, only for front markers when headlights are on.