This stuff rocks!
#1
TECH Resident
Thread Starter
iTrader: (3)
Join Date: Dec 2002
Location: Showing Italians the power of LS1
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
This stuff rocks!
I wanted to share a good experience using this MotorSilk engine additive. I did a lot of research (it's not related to that garbage PTFE teflon additive crap) and treated my car. 1K miles later, I have to say:
-A few PSI more oil pressure
-2 MPG better fuel economy
-Oil filters look fine after being in the car 2-4K miles
-Little noises I used to hear are now gone (valvetrain, cold start, etc.).
Here is the website to a vendor: http://209.200.118.63/Technology.cfm
and a link to the manufacturer's website: http://www.altboron.com/products/
I found a tech sheet on the stuff: http://www.altboron.com/products/pdf..._rev200609.pdf
and the MSDS: http://www.altboron.com/products/pdf/msds_ms.pdf
and a paper I found explaining the technologies involved: http://209.200.118.63/resources/WInn...ion%20PDF3.pdf
Has anyone else besides me tried this stuff, or have any comments?
-A few PSI more oil pressure
-2 MPG better fuel economy
-Oil filters look fine after being in the car 2-4K miles
-Little noises I used to hear are now gone (valvetrain, cold start, etc.).
Here is the website to a vendor: http://209.200.118.63/Technology.cfm
and a link to the manufacturer's website: http://www.altboron.com/products/
I found a tech sheet on the stuff: http://www.altboron.com/products/pdf..._rev200609.pdf
and the MSDS: http://www.altboron.com/products/pdf/msds_ms.pdf
and a paper I found explaining the technologies involved: http://209.200.118.63/resources/WInn...ion%20PDF3.pdf
Has anyone else besides me tried this stuff, or have any comments?
Last edited by Snootch; 12-17-2007 at 09:55 AM.
#2
TECH Resident
Thread Starter
iTrader: (3)
Join Date: Dec 2002
Location: Showing Italians the power of LS1
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
No one has tried this stuff? I suggest some of you do because I think it would be great for our (especially high-mileage) F-bodies. I found this stuff and figured you guys might like it. I know some of you might cry "it's snake oil!" but usually i'm skeptical about products like this, and I thinks it's the real deal.
#6
Banned
Join Date: Mar 2007
Location: Shreveport,Louisiana
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
I wanted to share a good experience using this MotorSilk engine additive. I did a lot of research (it's not related to that garbage PTFE teflon additive crap) and treated my car. 1K miles later, I have to say:
-A few PSI more oil pressure
-2 MPG better fuel economy
-Oil filters look fine after being in the car 2-4K miles
-Little noises I used to hear are now gone (valvetrain, cold start, etc.).
Here is the website to a vendor: http://209.200.118.63/Technology.cfm
and a link to the manufacturer's website: http://www.altboron.com/products/
I found a tech sheet on the stuff: http://www.altboron.com/products/pdf..._rev200609.pdf
and the MSDS: http://www.altboron.com/products/pdf/msds_ms.pdf
and a paper I found explaining the technologies involved: http://209.200.118.63/resources/WInn...ion%20PDF3.pdf
Has anyone else besides me tried this stuff, or have any comments?
-A few PSI more oil pressure
-2 MPG better fuel economy
-Oil filters look fine after being in the car 2-4K miles
-Little noises I used to hear are now gone (valvetrain, cold start, etc.).
Here is the website to a vendor: http://209.200.118.63/Technology.cfm
and a link to the manufacturer's website: http://www.altboron.com/products/
I found a tech sheet on the stuff: http://www.altboron.com/products/pdf..._rev200609.pdf
and the MSDS: http://www.altboron.com/products/pdf/msds_ms.pdf
and a paper I found explaining the technologies involved: http://209.200.118.63/resources/WInn...ion%20PDF3.pdf
Has anyone else besides me tried this stuff, or have any comments?
Trending Topics
#9
TECH Resident
Thread Starter
iTrader: (3)
Join Date: Dec 2002
Location: Showing Italians the power of LS1
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
Two years ago, I would of whole-heartedly agreed with you. However,the word "additive" gives this stuff a bad name, since it conjures up recollections of the crappy teflon additives foisted upon the public over the years. I wouldn't recommend this stuff to you guys if it didn't work.