How to replace Window Motor ?
#1
TECH Addict
Thread Starter
iTrader: (7)
Join Date: Apr 2004
Location: NorcaL
Posts: 2,187
Likes: 0
Received 0 Likes
on
0 Posts
How to replace Window Motor ?
Is there any guides ???
My window on the driver side just fell inside the door today and im guessing its the motor that went out.
I found the shbox but im looking for something that shows better how to do it.
My window on the driver side just fell inside the door today and im guessing its the motor that went out.
I found the shbox but im looking for something that shows better how to do it.
#2
12 Second Club
iTrader: (3)
Join Date: Mar 2006
Location: waterloo IL (near STL, MO)
Posts: 834
Likes: 0
Received 0 Likes
on
0 Posts
http://shbox.com/page/windowmotor.html
i know you already looked there but this is what i used to replace mine. look at those pics very closely and you will see where you need to drill and all that good stuff
i know you already looked there but this is what i used to replace mine. look at those pics very closely and you will see where you need to drill and all that good stuff
#3
TECH Addict
Thread Starter
iTrader: (7)
Join Date: Apr 2004
Location: NorcaL
Posts: 2,187
Likes: 0
Received 0 Likes
on
0 Posts
Ok so I took the door apart and i found this coil kinda thing in there. It was at the bottom of the door and its loose. I think it broke off from somewhere. Do you guys know what it might be ???
#4
Staging Lane
iTrader: (1)
Join Date: May 2007
Location: Katy, Texas
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
The only coil thing I can think of in your door would be the regulator coil. If it's loose or broken that's a bad thing, and certainly shouldn't be at the bottom of your door. Are you following that guide Zach linked you to??