abs inop and trac wont lights on, tried body scan but says cant communicate with BCM
03-09-2008, 04:08 PM
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jan 2007
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
abs inop and trac wont lights on, tried body scan but says cant communicate with BCM i changed my rotors on my 02 ta and ever since these lights have been on and i have no abs or traction control....... i took it to school and used one of our snapon tech 2's and it says can not communicate with the BCM or body control module...any ideas?????????????
03-09-2008, 09:45 PM
#2
Teching In
iTrader: (1)
Join Date: Dec 2006
Location: Arnold, MO
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
you may have a ground issue. check alldata, gm, etc to get a flow chart of no comm with bcm. same thing happened on my 96 and it just had a bad ground. sanded it down and it was fine.
