Header Install
Thread Starter
12 Second Club
iTrader: (14)
Joined: Oct 2007
Posts: 128
Likes: 0
From: Las Vegas, NV
Header Install well, the time has come. im puttin on the LTs on today. i got a great deal on brand new pacesetters that i couldnt turn down. the tsp ory just came in, so here i go. im bracing myself for a very stressful day. itll all be worth it when im done.
my day entails:
installing LTs/ORY
plugs and wires
fuel filter
oil change
egr/air block-offs
new set-up will be-> Pacesetter Longtubes, Texas Speed ORY, LM1
my day entails:
installing LTs/ORY
plugs and wires
fuel filter
oil change
egr/air block-offs
new set-up will be-> Pacesetter Longtubes, Texas Speed ORY, LM1
Dont stress it man. Thats fun **** to do your first time. Was for me anyways. I would advise against using the pacesetter exhaust gaskets if they still come with the cardboard ones though. They are a pita to remove down the road. But have fun and if you get pissed at something take like a 5 min breather to clear your thoughts. Nothing goes right when you are angry.
Thread Starter
12 Second Club
iTrader: (14)
Joined: Oct 2007
Posts: 128
Likes: 0
From: Las Vegas, NV
thanks man. i appreciate it. the car is apart right now, and i cant seem to find any directions for the y-pipe. although the set-up might be a bit noob, i like to go by the book. guess im going to try to figure it out on my own, unless someone can help me w it quickly.
I found the y pipe too be the most annoying part. It probably would have been easier with a lift, but mine leaks. I need to get new clamps and try and tighten it all up. I dunno, I thought my tsp y did not fit very well.
Banned
Joined: Apr 2007
Posts: 269
Likes: 0
thanks man. i appreciate it. the car is apart right now, and i cant seem to find any directions for the y-pipe. although the set-up might be a bit noob, i like to go by the book. guess im going to try to figure it out on my own, unless someone can help me w it quickly.
