SLP Underdrive Pulley
11-18-2010, 08:50 AM
#22
So I transposed the last two digits, heh?!?
Bummer, ...
Guess I'd better go back & fix it, ...
Bummer, ...
Guess I'd better go back & fix it, ...
Bringing this back from the dead, because it bit me in the butt.
The previously recommended gatorback belt 4040327, at 32.75 inches, is too short for the AC belt.
The last 3 digits correspond to the length of the belt.
The gatorbacks you want to order are:
4060760=76.0 inches, main belt (summit shows same length as x763, but 7 bucks cheaper.)
4040372=37.2 inches, AC belt (summit does not currently show length for x378, but by my math will be .5 inches longer.)
when in doubt, cross-reference another manufacturer, or read the instructions.
...I knew better.
The previously recommended gatorback belt 4040327, at 32.75 inches, is too short for the AC belt.
The last 3 digits correspond to the length of the belt.
The gatorbacks you want to order are:
4060760=76.0 inches, main belt (summit shows same length as x763, but 7 bucks cheaper.)
4040372=37.2 inches, AC belt (summit does not currently show length for x378, but by my math will be .5 inches longer.)
when in doubt, cross-reference another manufacturer, or read the instructions.
...I knew better.
11-20-2010, 02:28 PM
#24
I picked up a used ASP after I did my cam install 
it sat in my shop for almost 2 years until I finally pieced together the rest of my build (heads engine bay cleaning header upgrade etc). I would never install this alone because its more trouble than its worth as a single mod.
it sat in my shop for almost 2 years until I finally pieced together the rest of my build (heads engine bay cleaning header upgrade etc). I would never install this alone because its more trouble than its worth as a single mod.
05-27-2018, 08:56 AM
#26
Teching In
Join Date: Nov 2017
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
We have them on sale here-
http://marylandspeed.com/advanced_se...eywords=100221
I always saw this as a mod you do while doing a cam. On it's own it may not be worth the hassle.
http://marylandspeed.com/advanced_se...eywords=100221
I always saw this as a mod you do while doing a cam. On it's own it may not be worth the hassle.
05-27-2018, 07:13 PM
#28
TECH Senior Member
Wise idea, as I have read on these forums that their service/customer care is almost non-existent. LOOONG shipping delays, no matter when it was promised.
