March Pulley difference
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I think I may have received the wrong pulley. I order one from ebay and it say its for a camaro, but if install the pulley to sit flush with the motor, it looks like the belt will not line up with the accessories.
The box say pdk 4521.
Anyone has any idea what pulley is this for?
Does anyone have a picture of their March pulley installed?
The box say pdk 4521.
Anyone has any idea what pulley is this for?
Does anyone have a picture of their March pulley installed?
#3
Teching In
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks, even though it is for a ls1. I want to know if it for a corvette or a f-body. I know there is a difference between the two.
Can anyone post pictures of their march pulley installed for their fbody?
THanks
Can anyone post pictures of their march pulley installed for their fbody?
THanks
#6
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
March does not even make a pulley/damper for the corvette. Part # 4521 is for an LS1 F body. Part # 4505 is the same pulley/damper with an included overdrive alternator pulley.
Trending Topics
#9
TECH Fanatic
iTrader: (41)
Join Date: Jul 2007
Location: Lancaster California
Posts: 1,431
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Don't feel bad I learned this lesson from a waterpump swap.
I installed the waterpump on the bottom picture, which is for C5 Vettes.
( notice the shallow pulley ). I have since installed the correct
waterpump on the top picture.
http://www.nookandtranny.com/Info_LSx.html#LSWaterPump
![](http://www.nookandtranny.com/Images/PagePhotos/Y-LS2H20Pump.jpg)
Here's the LSx information index page.
http://www.nookandtranny.com/Info_LSx.html
.
I installed the waterpump on the bottom picture, which is for C5 Vettes.
( notice the shallow pulley ). I have since installed the correct
waterpump on the top picture.
http://www.nookandtranny.com/Info_LSx.html#LSWaterPump
![](http://www.nookandtranny.com/Images/PagePhotos/F-LS1H20Pump.jpg)
![](http://www.nookandtranny.com/Images/PagePhotos/Y-LS2H20Pump.jpg)
Here's the LSx information index page.
http://www.nookandtranny.com/Info_LSx.html
.
#10
Teching In
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
THanks
Everyone thanks for the reply, all good information to me.
#11
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hi Team,
Anyone have a March Pulley installed pic?
I wrote March and they are dodging me. My problem is that I used a pulley install stud to press on the new pulley as far as I can make it go. The crank shaft snout is about 1/8"+ from being flush with the pulley's inner hub.
Is it on all the way? I can't tell for anything. None of the other accesories are on the motor, but I wouldn't trust 'eyeballing the belt line' any way.
Thanks!
Anyone have a March Pulley installed pic?
I wrote March and they are dodging me. My problem is that I used a pulley install stud to press on the new pulley as far as I can make it go. The crank shaft snout is about 1/8"+ from being flush with the pulley's inner hub.
Is it on all the way? I can't tell for anything. None of the other accesories are on the motor, but I wouldn't trust 'eyeballing the belt line' any way.
Thanks!