Need help/advice with motor mounts
12-28-2008, 05:43 AM
#1
Launching!
Thread Starter
iTrader: (5)
Join Date: Jun 2007
Location: Richmond, VA
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Need help/advice with motor mounts Need to decided which type to get? I heard solid were great. but a complete pain in the *** to install. So, any advice...opinions... or input would be awesome.
12-28-2008, 07:33 AM
#2
Unless your making an all out drag car, I would go with poly. From alot of feedback though I have heard about solid mounts, they aren't as bad you would think they would be with vibration and all. The one thing about poly though is one of them goes in real easy, good luck with the second one
Alot of people who installed there own will agree with me on that one. I would hold off until you do longtube headers if you haven't already though. It is ALOT EASIER with the headers out of the car
Alot of people who installed there own will agree with me on that one. I would hold off until you do longtube headers if you haven't already though. It is ALOT EASIER with the headers out of the car
12-28-2008, 09:56 AM
#3
TECH Senior Member
iTrader: (96)
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,241
Likes: 0
Received 81 Likes
on
72 Posts
i did mine with LTs in the car and the only problem was the rear two bolts on the driver mount. the other six bolts are a breeze to get to and there is no reason to pull the headers. i went with prothane and got them from summit for about 60 shipped.
