WS6 GreeN

There is a sensor right behind the intake on the drivers side and its screwed into the block I believe. It only has one wire on the connector. Any clue what this is and what it takes to remove it? It's right beside another sensor that has a 10mm or so bolt holding it in.

conan

iTrader: (5)

Oil pressure sending unit is the black post that sticks up from the engine and the sensosor bolted in is the cam position sensor.

Oil pressure on the left cam is on the right in this pic.http://mycarpics.shutterfly.com/202

TORCHD 02 TA

iTrader: (39)

OPSU, you need a socket to take it off. becareful not to break it otherwise you will be going to the parts store to replace it

the_merv

iTrader: (88)

Yea, there is a special Socket for that.. don't know how you are going to get to it though, very minimal clearance back there..lol

WS6 GreeN

Ended up at NAPA and left with that fresh feeling...of being raped. $60 for the sending unit, and $12 for the socket later, the sensor was fixed. Now one of the damn fuel injectors is leaking! Does it ever end?