00cls1camaross

iTrader: (10)

Anyone seen a gain from a flowmaster merge rather than the shitty TSP crap?

SSJIMMY

iTrader: (8)

Has everyone with a custom y-pipe had to cut the brace or hammer it up to tuck the pipe in there on the drivers side.

INMY01TA

iTrader: (1)

No brace here. I use an SLP driveshaft loop.

SSJIMMY

iTrader: (8)

not the one is just on with 4 bolts under the driveshaft the one on the driver side about where there turn starts for it to head for the y collector. I went to a shop the other day and he said to get it to tuck up there it would have to be 2.5" piping and and he would have to cut and hammer on that area.

merlinn

iTrader: (8)

What size flowmaster merge are yall going with, I was thinking 2.5 inch inlet and 3.5 outlet to a 3.5 cutout. then tapered down to the stock muffler. I was thinking 3 inlet to 4 outlet with a 4 inch cutout is too big.

Full-Force

iTrader: (11)

When I build a y pipe or duals on the car I cut that brace out. You can get about an extra 1/2". A 1/2" is alot when you only have about 4".

Engine_HP

iTrader: (1)

keep them coming guys.

TORCHD 02 TA

iTrader: (39)

here are my pics as promised... Only 10 months late

see my sig for my exhaust set up

Cumbias

Any sound clips???

droptopT/A

iTrader: (19)

hey nice set up weredid u buy those flanges i bought somefrom summit but there the old school ones i like how urs are flat against each there

orangeapeel

iTrader: (18)

They wobble too and fro.

Damn son you un-earthed this thread from the grave!

TORCHD 02 TA

iTrader: (39)

Here is an idle clip.. If you listen I tell you when the cutout is closed and when I open it!

also I am some clips at the track too



http://www.youtube.com/watch?v=o_jezOZ2Fao
http://www.youtube.com/watch?v=S1Qx8hgu8i0
http://www.youtube.com/watch?v=ayzirfP3498

TORCHD 02 TA

iTrader: (39)

My buddy who owns an exhaust shop did my whole exhaust

Engine_HP

iTrader: (1)

not asking for much, need to collect few good pics to show my exhaust shop how i want things to happen.

studderin

iTrader: (28)

mine

thewholefnshow1

iTrader: (2)

^ the second and third picture looks like a snake is headed someone's way. You could freak someone out if they didn't know what that was and it was dark and you had them come in and cut the light on.

black00ssFL

iTrader: (24)

Here's mine. I'm at a little disadvantage to some of the others since I have the MWC fab'ed 9" and have that tq arm brace. It causes you to have to have the merge much farther foward towards the engine which causes some crazy tight bends for the driver side pipe.

















And, a quick sound clip of open versus closed.

http://s191.photobucket.com/albums/z...t=100_1412.flv